Unlock the potential of your 200 QX !!
The engineers at Blade are ready to turn everything you thought you knew about the 200 QX on its head with a new firmware update. When you install this latest update with the required update cable (BLH7840), your 200 QX will be capable of executing inverted flight and impressive aerobatics when paired with the appropriate propellers.
Upgrade Today and Experience:
Stability Mode (bailout) – White Status LED
This mode is similar to Stability Mode for upright flight. In this mode the throttle is offset to run only from 51% to 100%, at up to 50% throttle the 200 QX propellers will spin but remain at idle until the throttle is raised. This throttle curve helps prevent a pilot from accidentally flying into the ground when flipping out of inverted flight and back to an upright position.
3D Stagility – Purple Status LED
3D stability mode features a self-leveling characteristic that’s active whenever a pilot releases the control sticks. Whether you’re flying inverted or upright, the 200 QX will always self-level so you can learn inverted flight without fear of losing control while in 3D Stagility mode. When flying in this mode, 0-50% throttle is reversed thrust and 51%-100 is positive thrust.
3D Agility – Yellow Status LED
3D Agility Mode was designed for experienced pilots, anyone who has mastered inverted flight in all orientations and advanced pilots looking for a full 3D flying experience with no self-leveling. When flying in this mode, 0-50% throttle is reversed thrust; 51%-100 is positive thrust.
New Bind Procedure- In order to activate the 200 QX in Aerobatic Mode, you must first bind the model with right rudder and install the optimized sport or 3D propellers.
* **Sport and 3D propellers reduce the average flight time of the 200 QX when compared to standard 200 QX blades. Please visit the product page for the 200 QX on bladehelis.com for more information on adjusted flight times.
Recommended for this Upgrade:
To maximize your flight time using these new modes the engineers at Blade recommend upgrading your battery to an 800mAh 2S 30C LiPo battery (EFLB8002SJ30).
Visit BladeHelis.com for more information.