Category:
How To Archives
  • Posted on May 13th, 2014 by 2 Brothers Hobby
    We step you through assembling your new Pilatus PC-6 Turbo Porter Receiver Ready model from Multiplex. See below for our radio setup (throws and expos) for a successful first flight. You can see our review of the Multiplex PC-6 Turbo...
  • Posted on February 13th, 2014 by Kurt Gornek
    Learn how to quickly assemble your new Ares RC P-51D Mustang 350 in this assembly video. Available in RTF and RFR versions, you’ll spend more time flying and less time on the bench. The Ares P-51D Mustang 350 is recommended...
  • Posted on December 5th, 2013 by 2 Brothers Hobby
    Learn how to assemble your Hitec Weekender Zipper RC airplane and even paint it to match the box with our decal and painting templates!     Zipper Assembly Video   What You’ll Need: Hitec Weekender Zipper P2GO kit 4-6 Channel...
  • Posted on October 15th, 2013 by Kurt Gornek
      Learn how to prepare your RC LiPo batteries for longer term winter storage and keep them in top condition during the hobby season in this video workshop.   RC LiPo Battery Long Term Storage   What You’ll Need: Balancing...
  • Posted on September 25th, 2013 by 2 Brothers Hobby
      Learn how to calibrate your TP820CD or TP1430C RC Battery Chargers.   Charger Calibration Workshop Video   What You’ll Need: TP820CD or TP1430C battery charger 12-30VDC power source DC Voltage Meter, accurate to 1mV Latest firmware installed LiPo battery...
  • Posted on September 7th, 2013 by 2 Brothers Hobby
      Learn how to connect two power supplies in parallel to double your usable wattage.     What You’ll Need: Two identical AC to DC power supplies Appropriate gauge (AWG) interconnect wire Prerequisite: Basic understanding of electrical principles (See the...
  • Posted on May 31st, 2013 by 2 Brothers Hobby
      If you own a Hitec Optima receiver and haven’t taken advantage of the SPC port, what are you waiting for?! It’s one of the easiest and most beneficial features of the receiver and allows you to monitor your main...
  • Posted on May 31st, 2013 by Hitec RCD
      In this video clinic we get you familiar with all the advantages of owning Hitec’s HPP-22 PC Programmer. Learn how to update your Hitec radio’s firmware as well as receivers and telemetry gear. You’ll also need the HPP-22 PC...
  • Posted on May 30th, 2013 by 2 Brothers Hobby
      Learn everything you’ll need to know about installing and operating Hitec’s full line of telemetry products in our 3 part video workshop series…         Prerequisite: Basic understanding of electrical principles (See the Knowledgebase sections Flight Batteries...
  • Posted on April 10th, 2013 by 2 Brothers Hobby
      Learn how to setup, program, and operate your Thunder Power TP610C or TP610C-ACDC multi-chemistry balancing charger.     What You’ll Need: TP610C or TP610C-ACDC Smart Multi-chemistry Charger 11VDC-18VDC Power Source (Up to 10A rated) LiPo, LiFePO4 (Lithium Iron Phosphate/A123),...